Free tool · SOC occupation codes

Skilled Worker going rate checker

Find the going rate for your occupation and working hours.

Search by job title or SOC code, enter weekly hours, and see the published going rate, pro-rated annual requirement and hourly equivalent, no spreadsheets or manual pro-rating.

Published going ratePro-rated rateHourly equivalentRate level tableSalary comparisonFull calculation

Free. No account required.

Check a going rate

Occupation + hours · instant result

Find your going rate

Published basis: 37.5 hrs/week
£

Reduced going rates

When reduced going rates apply

Most sponsors start with the full published going rate for the occupation code on the Certificate of Sponsorship. Some Skilled Worker salary options allow a percentage of that going rate when the worker qualifies, but the percentage, eligibility rules and evidence differ by option. Getting the SOC code wrong usually means getting the reduction wrong too.

A going rate checker gives you the baseline: the annual (and hourly) figure for the SOC code and contracted hours. A reduction is a second step, you apply the allowed percentage only if the worker meets the conditions for that salary option (new entrant, PhD, shortage occupation, national pay scale, and so on). Sponsoro's Skilled Worker salary checker is built for that wider question; this page focuses on the going-rate maths and when a reduced rate might apply.

Step 1, Confirm the occupation code matches the job

Reductions are tied to the going rate for the SOC code on the CoS. If the worker's duties have drifted to a different occupation, the rate you calculated at assignment may no longer be the right benchmark. Review the job description, payroll records and day-to-day role before relying on a reduced percentage.

Step 2, Look up the standard going rate for those hours

Use the tool above with the correct SOC code and weekly hours. Where the table assumes 37.5 hours, the pro-rated formula is: published annual going rate × worker hours ÷ 37.5. That figure is the starting point before any percentage reduction.

Step 3, Apply the salary option percentage

If the worker qualifies for a reduced going-rate option, multiply the pro-rated going rate by the allowed percentage (commonly 70%, 80% or 90% depending on the option). Compare the result to actual pay, and to the separate general salary threshold where it still applies. Meeting a reduced going rate does not automatically mean every other Skilled Worker requirement is satisfied.

Worked examples (illustrative)

New entrant (under 26 or recent graduate)

Standard basis: £38,700 published going rate for the occupation

Reduced approach: 70% of the standard going rate where the new-entrant option applies

Confirm the worker meets the new-entrant definition before using a reduced rate.

PhD qualification relevant to the job

Standard basis: £38,700 published going rate

Reduced approach: 80% or 90% of the going rate depending on whether the PhD is STEM

The discount applies to the going-rate element, not a bypass of all salary rules.

Postdoctoral researcher in a designated role

Standard basis: Occupation going rate from Appendix Skilled Occupations

Reduced approach: Specific salary options may apply, check the route and SOC code tables

Use the occupation code that matches the postdoctoral role, not a generic research code.

Shortage occupation (when listed)

Standard basis: Published going rate for the SOC code

Reduced approach: 80% of the going rate while the occupation remains on the shortage list

Shortage lists change, always use the list in force on the CoS assignment date.

Healthcare and education roles sometimes use national pay scales instead of a straight 37.5-hour pro-rating. If your worker is on an Agenda for Change or teacher pay band, use the salary option that matches that route rather than forcing a generic SOC percentage.

Keep a record of which option you used, the going rate at assignment, the percentage applied and the evidence that supported eligibility. That record is what you will need if salary is reviewed during a Home Office compliance visit or an internal audit. Salary compliance in Sponsoro stores the calculation alongside payroll checks so the going rate and any reduction are not scattered across spreadsheets.

One focused question

What is the relevant going rate for this occupation and working pattern?

The Salary Checker answers whether a worker's salary appears sufficient overall. This tool answers one thing extremely well: the occupation going rate, pro-rated for contracted hours.

Going Rate Checker

What is the going rate for this SOC code and hours?

Salary Checker

Does this salary satisfy the wider Skilled Worker requirements?

Run the full Salary Checker

Your result

Published rate, pro-rated rate and hourly equivalent.

Select an occupation, enter weekly hours, and see the going rate calculated instantly, with optional salary comparison and margin.

Going rate

2134 · Programmers and software dev

Published

£54,700

Basis

37.5 hrs

Your hours

40 hrs

Pro-rated going rate

£58,347

£28.05/hour

Transparent

See how the going rate was calculated.

For occupations based on a 37.5-hour working week, Sponsoro shows the maths clearly, published annual going rate, standard hours, worker hours and pro-rated result.

Formula: published going rate × worker's weekly hours ÷ 37.5

How it was calculated

Published

£45,000

÷

37.5

×

40

=

£48,000

Working patterns

Different hours? See the impact instantly.

Use the hours slider to explore how a proposed working-pattern change affects the going-rate position, without starting again.

Hours impact

30 hrs/week£36,000
37.5 hrs/week£45,000
40 hrs/week£48,000
45 hrs/week£54,000

Healthcare & education

Some roles use different salary tables.

Certain healthcare and education occupations use national pay scales rather than standard going-rate tables. When Sponsoro detects one of these codes, the checker switches to pay framework and band selection, with pro-rating based on the applicable basis hours.

Why the going rate isn't always the final salary requirement

Depending on the worker, the final salary requirement may also involve the general salary threshold, Skilled Worker salary options, new entrant provisions, PhD-related options, healthcare rules, transitional provisions and other circumstances.

Inside Sponsoro

Sponsoro recalculates when reality changes.

Inside the product, Sponsoro already knows each worker's SOC code and weekly hours from the CoS. When HR changes hours, the going rate recalculates automatically, with salary margin and review flags.
Start on Free

Going rate changed

Previous (37.5 hrs)£45,000
New (42 hrs)£50,400
Current salary£49,500

Potential shortfall £900 · Review required

One occupation

Free Going Rate Checker

Search a SOC code, enter hours, see the pro-rated going rate.

Every sponsored worker

Sponsoro Salary Compliance

Continuous going-rate monitoring, payroll checks and automatic recalculation.

See Salary Compliance

Sponsoro is not affiliated with the Home Office. Results are informational and depend on the information entered. Meeting the going rate does not guarantee Skilled Worker visa eligibility.

Sources

Official guidance this page is based on

Last reviewed against GOV.UK on . Sponsoro doesn't give immigration advice, so always check the current Home Office guidance before you act.

FAQ

Frequently asked questions

What is the Skilled Worker going rate?

The going rate is the salary benchmark associated with a particular occupation code under the Skilled Worker rules.

Where do Skilled Worker going rates come from?

Going rates are published by the Home Office within Appendix Skilled Occupations. Different tables apply depending on the occupation and relevant Skilled Worker salary option.

Are going rates based on 37.5 hours?

Many occupation going rates are based on a 37.5-hour working week and must be adjusted where the worker's sponsored weekly hours are different. Some healthcare and education occupations use different national-pay-scale rules.

How do I calculate a going rate for 40 hours?

Where the occupation uses a 37.5-hour basis, Sponsoro calculates: published annual going rate ÷ 37.5 × 40.

Does meeting the going rate mean the salary qualifies for a Skilled Worker visa?

Not necessarily. The worker may also need to satisfy a separate general salary threshold and other applicable Skilled Worker requirements.

Can the going rate be reduced?

Some Skilled Worker salary options can use a percentage of the standard going rate (for example new entrant or PhD options). Eligibility depends on the worker's circumstances, see the reduced going rates section on this page.

How do I figure out going rate reductions for my SOC code?

Look up the standard going rate for the SOC code and hours, then apply the percentage allowed for the salary option you are using. The worked examples on this page walk through common scenarios.

Does a reduced going rate replace the general salary threshold?

No. You must satisfy every applicable Skilled Worker requirement. A reduced going rate only affects the going-rate element of the test.

Which SOC code should I use?

The occupation code should reflect the actual role and duties. If you're unsure which occupation code applies, you should review the official occupation information or seek appropriate professional guidance.

Find the going rate in seconds.

Search the occupation. Enter the hours. See the published rate, adjusted rate and calculation.

Free. No account required.