Part of our Right to work guides

Right to Work

How to do a Right to Work share code check (2026 employer's guide)

Last updated:

A Right to Work share code check needs the worker's share code and date of birth, must be done on GOV.UK before work starts, and only gives you a statutory excuse if you match the photo and keep a dated copy of the profile page.

How to do a Right to Work share code check (2026 employer's guide), Right to Work
Portrait of Dr. Hassan Ali KhanBy Dr. Hassan Ali Khan · C EO8 min read

On 1 October 2026, the list of people you have to check got longer. Until then, Right to Work checks were mostly an HR task for new employees. Under the Border Security, Asylum and Immigration Act 2025, the duty now also covers people you take on under a worker's contract, individual sub-contractors, and people you find through an online matching platform.

For most of those people, the check you'll do is a Right to Work share code check. It takes a few minutes. Done properly, it gives you a statutory excuse: a legal defence if it later turns out the person had no right to do the work. Done badly, it gives you nothing, and you usually find out at the worst moment, during a Home Office visit or when a penalty notice arrives.

This guide covers how to do a share code check step by step, what evidence to keep, and the small mistakes that quietly cancel your excuse. It's written for UK employers, and especially for sponsor licence holders, where a Right to Work failure costs more than a fine.

What is a Right to Work share code?

A share code is a nine-character code, starting with W, that a worker creates through GOV.UK's prove your right to work service. It lets you see their immigration status online, straight from Home Office records. Each code lasts 90 days, and the worker can create a new one whenever they need to.

Anyone with an eVisa proves their right to work this way. You can no longer accept biometric residence permits or cards, so that now covers most workers who aren't British or Irish. If you sponsor workers, our eVisa Right to Work check guide for sponsors covers the extra steps. British and Irish citizens can't get a share code. They prove their right to work with a passport or through a certified digital identity check, which we cover below.

Keep one thing in mind from the start. The share code lets you run the check, but it isn't proof that you ran it. That distinction catches out a lot of employers.

How to do a Right to Work share code check, step by step

You need two things from the worker: their share code and their date of birth.

  1. Get the code and date of birth. Right to Work codes start with W. If the worker gives you a code starting with R or S, it was made for renting or another purpose, so ask them for a new one.

  2. Run the check on GOV.UK. Enter both into the Check a job applicant's right to work service.

  3. Read the profile page. It shows the person's photo, whether they can do the work you're offering, and any conditions or time limits, such as a cap on working hours.

  4. Match the photo to the person. Do this in person or over a live video call.

  5. Save the evidence. Save the profile page as a PDF or HTML file, record the date of the check, and store it securely.

Do all five before the person starts work. A check completed on their second day doesn't cover their first.

Step 4 is the one most often skipped, usually because the share code arrived by email and nobody saw the person until their first shift. Step 5 is the one most often done wrong.

Does a screenshot from the worker count?

No. Your evidence has to be the profile page you got from the Home Office service yourself. A screenshot the worker sends you, a photo of their phone, or a note in your HR system saying "share code checked" won't give you a statutory excuse.

Think of it this way: the share code is the question you ask the Home Office, and the profile page is its answer. Only the answer is proof. If your file holds the code and a tick, you've kept the question and thrown away the answer.

Keep the saved profile page for as long as the person works for you and for two years after they leave, then delete it securely.

Which check applies to which worker?

Picking the right route matters as much as doing the check carefully. If a person's status has to be checked online and you accept a physical document instead, you have no statutory excuse, however neatly you filed the copy.

Worker

How to check

eVisa holder (most workers who aren't British or Irish)

Online share code check

EU Settlement Scheme, settled or pre-settled status

Online share code check

British or Irish citizen

Manual check of an original passport or other acceptable document, or a certified digital identity check for a valid passport

Application, appeal or review still waiting

Employer Checking Service

If you're not sure which route fits, settle it before the start date. You can't fix the wrong route afterwards.

Checking British and Irish workers

Because British and Irish citizens can't create a share code, you have two options. You can check an original document, such as their passport, with the person present, then keep a dated copy. Or you can use a certified digital verification service provider (still often called an IDSP) to check a valid British or Irish passport for you.

It's easy to forget that the duty applies to British staff too. Without a dated check on file, you have no statutory excuse for them either. Not everyone has a valid passport, so keep a manual route available alongside any digital one.

When to use the Employer Checking Service

Sometimes a worker can't prove their status online or with documents, usually because an application, appeal or administrative review is still waiting for a decision. In that case, ask the Home Office Employer Checking Service.

If the Home Office confirms the person can work, you'll receive a Positive Verification Notice. It gives you a statutory excuse for six months from the date on the notice. Keep the notice itself, put the six-month date in your diary, and check again before it runs out.

Do you need to repeat a share code check?

That depends on what the first check showed.

  • Continuous right to work, for example British or Irish citizenship, settled status or indefinite leave. You check once, before the person starts.

  • Time-limited permission. Your excuse only lasts until the permission ends, so you need a follow-up check on or before the expiry date.

Almost all of the risk sits in the second group. The follow-up often falls due years after the first check, when the person who did it has moved on and the date lives in a spreadsheet nobody opens. To work out whether a particular worker needs a follow-up check, and when, use the free Right to Work recheck calculator.

What changed on 1 October 2026

The Home Office's employer's guide to right to work checks was updated on 1 October 2026, when the Border Security, Asylum and Immigration Act 2025 widened who counts as an employer under the illegal working rules. As well as employees, you now need to check people you:

  • engage under a worker's contract

  • engage as individual sub-contractors

  • find and engage through an online matching service, such as a delivery or cleaning platform

Civil penalties for these new groups only apply where the work started on or after 1 October 2026. Genuinely self-employed people trading through their own company are generally outside the new rules. If your business relies on contractors or platforms, read the worked examples in the guide before you decide who's in scope.

For many businesses, this means share code checks are now part of onboarding contractors as well as employees.

What happens if you get it wrong

If you employ someone who doesn't have the right to work and you can't show a valid check, the Home Office can issue a civil penalty of up to £60,000 for each illegal worker. If you knew, or had reasonable cause to believe, that the person couldn't work for you, it becomes a criminal offence, with up to five years in prison and an unlimited fine.

Sponsor licence holders face a third risk. Right to Work sits inside your sponsor duties, so a missing or broken check can also lead to a downgrade, suspension or revocation of your licence. That puts every sponsored worker you employ at risk, not just the one with the gap.

How this fits with your sponsor duties

For sponsored workers, two separate duties overlap:

  1. The Right to Work duty applies to every employer and protects you from a civil penalty.

  2. Your sponsor duties require you to keep the records listed in Appendix D and to report certain changes to the Home Office.

A sponsored worker whose permission runs out without a follow-up check breaks both. So file each Right to Work check against the duty it meets, with the route, date, outcome and any follow-up date in one place, rather than as a loose scan in a personnel folder.

Your share code check checklist

Before the worker starts, make sure you have:

  • their share code (starting with W) and date of birth

  • a check run on GOV.UK, not a screenshot from the worker

  • the photo matched to the person, in person or on a live video call

  • the profile page saved as a PDF or HTML file, with the check date recorded

  • any conditions noted, such as limits on hours or the type of work

  • a follow-up date set if their permission is time-limited

For the wider picture, the free sponsor licence health check scores your Right to Work process alongside your other sponsor duties.

How Sponsoro helps

Sponsoro guides your team to the right check for each worker, then records the route, date, outcome, saved evidence and any follow-up date together. When someone's permission is time-limited, the follow-up appears before it's due, so you aren't discovering it during an audit. Because each piece of evidence is filed against the duty it supports, it shows in your Appendix D position and in any audit pack you export.

Sponsoro doesn't carry out the official check. You still use the GOV.UK service for that. What Sponsoro does is make sure the result is kept, dated and followed up.

See how Right to Work compliance works in Sponsoro, or start with the free recheck calculator.

Portrait of Dr. Hassan Ali Khan

About the author

Dr. Hassan Ali Khan

C EO

I work as a General Practitioner in Hampshire and founded a social care company with an in-house technology arm that developed Sponsoro. Born from our own need to meet Home Office sponsor licence obligations and protect our operations, Sponsoro has grown into a compliance platform for UK employers. My experience in health and social care and business management drives my passion for using technology to simplify compliance, reduce administration and give businesses oversight and confidence.

LinkedIn profile

Continue reading

Written against: Employer's guide to right to work checks · 1 October 2026. Guidance changes regularly, check the current version before acting on a specific case. Sponsoro provides compliance information, not regulated immigration advice. Editorial policy.

FAQ

Common questions

How do I check a Right to Work share code?

Ask the worker for their share code and date of birth, enter both into GOV.UK's Check a job applicant's right to work service, match the photo to the person in person or on a live video call, then save the profile page as a PDF or HTML file with the date of the check. Do all of this before they start work.

How long is a Right to Work share code valid for?

A share code lasts 90 days from when the worker creates it. If it has expired, ask the worker for a new one. Right to Work share codes start with the letter W.

Does a screenshot of a share code check give me a statutory excuse?

No. Only the profile page you get from the Home Office service yourself counts, saved and dated. A screenshot from the worker, a photo of their phone or a copy of the share code alone won't give you a statutory excuse.

Do I need to check the right to work of British citizens?

Yes. British and Irish citizens can't get a share code, so check an original passport or other acceptable document with them present and keep a dated copy, or use a certified digital identity provider to check a valid British or Irish passport.

Who needs a Right to Work check from 1 October 2026?

As well as employees, you now need to check people you engage under a worker's contract, individual sub-contractors and people engaged through an online matching service. Civil penalties for these groups only apply where the work started on or after 1 October 2026.

Do I need to repeat a Right to Work check?

Only where the person's permission to work is time-limited. Your excuse lasts until the permission ends, so do a follow-up check on or before the expiry date. A continuous right to work needs only one check, before employment starts.

How long does a Positive Verification Notice last?

A Positive Verification Notice from the Employer Checking Service gives you a statutory excuse for six months from the date on the notice. Keep the notice and check again before the six months run out.

Stop tracking this by hand. Let Sponsoro watch it.

Sponsoro applies the rules in this guide to your own sponsored workers every day, explains what needs attention and keeps the evidence behind it.

Free for up to 2 sponsored workers. No card needed. New organisations get 14 days with the same feature entitlements as the Growth plan, then stay on Free until you upgrade.